Mobile units
- to reduce the cost of transportation of solid waste and the amount of ejected material in landfills;
- to eliminate the dumps effectively;
- to reduce transport costs for garbage collection after mass events (rallies, festivals, etc.);
- to extend the service life of solid waste landfill by reducing the volume of solid waste and use as a secondary raw material;
- to improve the environment by eliminating unauthorized burning of solid waste;
Mobile complex for utilization of solid household and industrial waste on the basis of single-axle trailers MCU-MSW-1 for the transport of cars Niva, Barguzin, Gazelle
The mobile complex includes:
- a trailer equipped with an awning brand MZSA 817708.003, does not require category BE
- autonomous source of power (gasoline generator, power 5 kW, 220 V);
- hydraulic bailing press HBP-10-4;
- cable to connect to circuit of 220 V (25 – 50 m).
| HBP-10-4 Technical Characteristics | |
| Pressing Force, t | 10 |
| Power Point Characteristics | 220В 2,2kW |
| Autonomous source of power: gasoline generator, kW | 5 |
| Dimensions (LхWхH), mm | 4370х1684х2100 |
| Download hole (HхW), mm | 500х750 |
| Press Weight, kg | 380 |
| Bale Dimensions (HхWхL), mm | 500х750х500 (1/4 from a eurobale) |
| Bale Weight, kg | to 90 |
| The pressing cycle, sec | 35 |
| Removing the bale | Mechanized |
| Tying the bale | Manually |
| Binding thread quantity, pcs | 2 |
| The stroke step, m | 860 |
| Performance, kg/h | 400-500 |
| Workers amount | 2 (driver, unit operator) |
| Price, rub (excluding delivery costs) | Negotiable |
The mobile complex includes:
- a biaxial trailer equipped with an awning brand MZSA 817731.001-05, does not require the E to B, gross weight is 750 kg;
- autonomous source of electric power;
- a single phased gasoline generator of 4,5 – 5,0 kW;
- a hydraulic bailing press HBP-10-4 (HBP-15-4);
- cable to connect to a single phase of 220 V, length of 25 - 50 m;
- electronic scales with battery (optional, negotiable price);
Production time: 25 – 40 working days
| HBP-10-4 and HBP-15-4 Technical Characteristics | ||
| Press Model | HBP-10-4 | HBP-15-4 |
| Pressing Force, t | 10 | 15 |
| Power Point Characteristics | 220 В; 2,2 kW | 380 В; 3 kW |
| Autonomous source of power: gasoline generator, kW | 5 | 6 |
| Dimensions (LхWхH), mm | 4370х1684х2100 | |
| Download hole (HхW), mm | 500х750
| |
| Press Weight, kg | 380 | 420 |
| Bale Dimensions (HхWхL), mm | 500х750х500 (1/4 from a eurobale)
| |
| Bale Weight, kg | to 90 | to 120 |
| The pressing cycle, sec | 35
| |
| Removing the bale | Mechanized
| |
| Tying the bale | Manually
| |
| Binding thread quantity, pcs | 2
| |
| The stroke step, m | 860
| |
| Performance, kg/h | 400-500 | 300-700 |
| Workers amount | 2 (driver, unit operator) | |
| Price, rub (excluding delivery costs) | Negotiable | Negotiable |
Mobile complex for utilization of solid household and industrial waste based on biaxial trailer MCU-MSW-2
The mobile complex includes:
- a trailer equipped with an awning of 81625 brand, requires category BE;
- autonomous source of electric power (gasoline generator, 5 kW, 220 V);
- hydraulic bailing press HBP-10-4;
- cable to connect to circuit of 220 V (25 – 50 m);
- electronic scales with battery (optional, negotiable price).
| HBP-10-4 Technical Characteristics | |
| Pressing Force, t | 10 |
| Power Point Characteristics | 220В 2,2kW |
| Autonomous source of power: gasoline generator, kW | 5 |
| Dimensions (LхWхH), mm | 4370х1684х2100 |
| Download hole (HхW), mm | 500х750 |
| Press Weight, kg | 380 |
| Bale Dimensions (HхWхL), mm | 500х750х500 (1/4 from a eurobale) |
| Bale Weight, kg | to 90 |
| The pressing cycle, sec | 35 |
| Removing the bale | Mechanized |
| Tying the bale | Manually |
| Binding thread quantity, pcs | 2 |
| The stroke step, m | 860 |
| Performance, kg/h | 400-500 |
| Workers amount | 2 (driver, unit operator) |
| Price, rub (excluding delivery costs) | Negotiable |
Mobile complex for utilization of solid household and industrial waste MCU-MSW-3 for the installation into the vehicle of Gazelle or any other truck
Mobile complex for utilization of solid household and industrial waste MCU-MSW-4
This mobile unit allows to obtain full bales like after the standard HBP-20M, it is possible to install a gasoline internal combustion engine instead of the generator.
The mobile complex includes:
- a trailer equipped with an electric awning under the brand 852111, requires category BE;
- autonomous source of power (gasoline generator, 6,5 kW, 380 V;
- hydraulic bailing press HBP-20M;
- cable to connect to circuit of 380 V (25 – 50 m);
- electronic scales with battery (optional, negotiable price).
| HBP-20M Technical Characteristics | |
| Pressing Force, t | 20 |
| Power Point Characteristics | 380В; 4 kW |
| Autonomous source of power: gasoline generator, kW | 6,5 |
| Dimensions (LхWхH), mm | 3000х1400х900 |
| Download hole (HхW), mm | 550х1100 |
| Press Weight, kg | 950 |
| Bale Dimensions (HхWхL), mm | 900х1050х750 |
| Bale Weight, kg | 100 ÷ 300 |
| The pressing cycle, sec | 45 |
| Removing the bale | Mechanized |
| Tying the bale | Manually |
| Binding thread quantity, pcs | 4 |
| The stroke step, m | 970 |
| Performance, kg/h | to 1000 |
| Workers amount | 2 (driver, unit operator) |
| Price, rub (excluding delivery costs) | 600 000* руб. |
This mobile unit is a horizontal press with a force of 30 tons on the low platform that ensures ease of loading material.
В мобильный комплекс входит:
- trailer equipped with an electric awning under the brand 842122, requires category BE;
- autonomous source of power (gasoline generator, 6,5 kW, 380 V);
- hydraulic bailing press HBP-30G;
- cable to connect to circuit of 380 V (25 – 50 m);
| HBP-30G Technical Characteristics | |
| Pressing Force, t | 30 |
| Power Point Characteristics | 380В; 4 kW |
| Autonomous source of power: gasoline generator, kW | 6,5 |
| Dimensions (LхWхH), mm | 5470х1000х1430 |
| Download hole (HхW), mm | 1200х950 |
| Press Weight, kg | 2800 |
| Bale Dimensions (HхWхL), mm | 750х1200х1000 |
| Bale Weight, kg | 200 ÷ 550 |
| The pressing cycle, sec | 80 |
| Removing the bale | Mechanized |
| Tying the bale | Manually |
| Binding thread quantity, pcs | 4 |
| The stroke step, m | 1400 |
| Performance, kg/h | to 1400 |
| Workers amount | 2 (driver, unit operator) |
| Price, rub (excluding delivery costs) | 1 260 000* руб. |
| TM5-MG Technical Characteristics | |
| Pressing Force, t | 5 |
| Power Point Characteristics | Internal combustion engine HONDA GVX390, АI92-95, 11 hp, consumption - 2,5 l/h |
| Dimensions (LхWхH), mm | 1100х1670х2365 |
| Download hole (HхW), mm | 550х800 |
| Unit Weight, kg | 650 |
| Bale Dimensions (HхWхL), mm | 450х550х600 |
| Bale Weight, kg | 40-80 |
| The pressing cycle, sec | 3 |
| Removing the bale | Mechanized |
| The stroke step, m | 1050 |
| Binding belts quantity, pcs | 2 |
| Compression ratio (depends on the material), times | 5-10 |
| Workers amount | 2 (driver, unit operator) |
| Price, rub (excluding delivery costs) | 350 000 |